Polaris 2012 ATV RZR 170 - Manual (Page 84)

81
MAINTENANCE
Battery
Battery Removal
1. Remove the driver’s seat. See
page 26.
2. On conventional batteries, remove
the battery vent tube (sealed
batteries do not have a vent tube).
3. Disconnect the black (negative)
battery cable first.
4. Disconnect the red (positive)
battery cable last.
5. Lift the battery out of the vehicle.
Be careful not to tip a
conventional battery sideways,
which could spill electrolyte.
NOTICE: If electrolyte spills, immediately wash it off with a solution of one
tablespoon baking soda and one cup water to prevent damage to the
vehicle.
Battery