Polaris 2000 Victory Sport Cruiser - Manual (Page 51)

46
MAINTENANCE
Headlight Adjustment
1. Inspect tire pressures, correct if necessary.
2. Select a level area with low lighting and enough room to place the motorcycle’s
front tire 25 feet from the wall or temporary screen.
3. Measure from the center of the headlight to the floor. Draw a horizontal line on
the wall or screen that equals this measurement.
4. Have someone who is approximately the same weight as the primary rider sit
on the motorcycle.
5. Place the motorcycle upright with the handlebars centered and turn on the
high beam of the headlight.
6. The top of the light beam must be even or below the horizontal line on the wall
or screen.
7. The light beam should project evenly to the right and left of the motorcycle’s
center line.
8. If headlight adjustment is necessary, turn the headlight aiming screws in or out
as needed.
7.62 M
(25 feet)
Aiming
Screws