Polaris 2009 Victory Vegas - Manual (Page 113)

108
MAINTENANCE
Fuel System
4. With the engine and exhaust cool, wrap a clean shop towel around the fuel line fitting (2) at the fuel rail.
Disconnect it from the fuel rail by squeezing both release buttons (3) simultaneously. Gently slide the fitting
from the fuel rail.
Notice Fuel can damage painted surfaces and plastic parts. Wipe spilled fuel immediately using a clean, dry, soft
cloth.
5. Lift the fuel tank and unplug the fuel pump wire harness at the
rear of the tank. At the rear left side of the tank, disconnect the
tank vent hose (California models) and the water drain hose.
6. Carefully remove the fuel tank. Be prepared to catch dripping fuel
in an appropriate container.
7. To reinstall the fuel tank, reverse the removal steps, routing fuel
supply hose to the right of breather hose.
8. Reinstall the fuel line fitting to the fuel rail by sliding the
quick-connect onto the rail connector until you hear it click.
9. Reinstall the fuel tank mounting screws.
Torque: 35 ft-lbs (47.5 Nm)
10. Reinstall the fuel line access cover. Reinstall the seat.
Fuel Filter Replacement
The fuel filters are attached to the electric fuel pump located inside the fuel tank. Fuel filter condition is associated
with engine performance and fuel economy. For fuel filter replacement procedures and special tools required, see
the VICTORY Service Manual or contact an authorized VICTORY dealer.
2
3