Pre-operation check, Electrical equipment – Polaris 2009 Victory Vegas User Manual

Page 57

Advertising
background image

52

PRE-OPERATION CHECK

Electrical Equipment

Turn Signals

Move the turn signal switch to the left. The front and rear left turn signals and the turn signal indicator light on the

panel should flash. Push the switch button IN to cancel the turn signal. The turn signals and turn signal indicator

should stop flashing. Repeat the procedure for the right turn signals.

Emergency Flashers

Press the top of the switch to activate the emergency flashers. All four turn signals and the turn signal indicator light

on the panel should flash. Press the bottom of the switch to cancel the flashers. The turn signals and turn signal

indicator should stop flashing.

Horn

Press the horn button. The horn should sound loudly.

Engine Stop/Run Switch

Be sure the engine stop/run switch stops the engine, or prevents the engine from starting when set to the STOP

position.

NOTE

:

If you regularly use this switch to shut off the engine, you’re already checking its operation each time you use the motorcycle.

Advertising