Polaris 2009 Victory Victory Vision - Manual (Page 154)

151
MAINTENANCE
Maintenance
Drive Belt Tension Adjustment
1. Move wheel to the tight spot location determined
previously in Drive Belt Tension Inspection.
2. Loosen the rear axle nut (1) on the left side.
3. Using a 13 mm deep socket, turn each axle
adjuster nut (2) clockwise an equal amount to
tighten the belt (reduce deflection) or an equal
amount counter-clockwise to loosen the belt
(increase deflection).
4. Tighten rear axle nut to proper torque.
Rear Axle Nut Torque: 65 lb-ft. (88 Nm)
5. Pump the rear brake pedal to re-set the pads
against the brake disc.
6. Verify proper belt tension (page 147) and wheel
alignment (page 152).
Nut is hidden by
swingarm. (Shown
for clarity)
1 2
visionownersmanual.book Page 151 Wednesday, February 13, 2008 4:31 PM