Electrolux B8831-5 - Manual (Page 25)

25 Using the Oven
3
How to use the clock functions
•
After a clock function has been selected, the corresponding function flashes
for about 5 seconds. During this period, the desired times can be set or modi-
fied using the or button.
•
When the desired time has been set, the function continues to flash for
approx. 5 seconds. After that the function is then lit. The set time begins to
run.
•
With Countdown the oven must also be switched on in order to set the clock
function.
•
By pressing and at the same time, the time set can be reset.
3
Checking the time set or remaining
Press the Selection button repeatedly, until the appropriate clock function
flashes and the time set or remaining is displayed.
2
Using residual heat with the Cook time and End time clock func-
tions
When the Cook time
and End time clock functions are used, the oven
switches the heating elements off, when 90% of the time set or calculated has
elapsed. The residual heat present is used to continue the cooking process until
the time set has elapsed (3 to 20 mins.).