Eaton Electrical Extended Battery Module (EBM) 9140 - Manual (Page 38)

MAINTENANCE
EATON Powerware ® 9140 EBM User’s Guide S 164201623 Rev A FINAL DRAFT 2006 July 14 32
4. Push down and hold the battery tray lock to unlock the tray. Pull the
battery tray slowly out onto a flat, stable surface; use two hands to
support the tray.
Repeat for each battery tray in the cabinet. See “Recycling the
Used Battery or UPS” on page 34 for proper disposal.
5. Slide the new battery trays into the EBM cabinet (see Figure 15).
Push each tray in until the battery tray lock on the handle catches to
lock the tray in place.
Battery Tray
Lock
Figure 15. Installing the Battery Trays
6. Replace the EBM front cover (see Figure 16) and tighten the two
front cover screws.
Figure 16. Replacing the EBM Front Cover