Pre-ride inspections, Start the engine and check – Polaris 2013 WideTrak LX User Manual
Page 49
Advertising

45
PRE-RIDE INSPECTIONS
Start the Engine and Check
Engine Stop Switch
Check the auxiliary shut-off switch for proper operation. Push the
switch down to stop the engine. Pull it up to allow restarting.
Lighting
Check the headlight (high and low beam), taillight, and brake light.
Replace burned out lamps before operating.
Mirrors (if equipped)
Adjust the mirrors so they can be used to their full advantage.
Operating Area
Before driving, check your surroundings. Be aware of obstacles and
make sure bystanders are a safe distance from the snowmobile.
Ignition Switch
Make sure the engine stops when the ignition switch is turned to OFF.
Advertising
This manual is related to the following products: