Polaris 2014 Ranger 800 EFI - Manual (Page 31)

29
FEATURES AND CONTROLS
Instrument Cluster
High water pressure may
damage components. Wash the
vehicle by hand or with a
garden hose using mild soap.
Do not use alcohol to clean the
instrument cluster. Do not
allow insect sprays to contact
the lens.
Speedometer
The speedometer displays
vehicle speed in either miles
per hour (MPH) or kilometers
per hour (km/h). See page 31.
Indicator Lamps
Lamp Indicates Condition
Vehicle Speed
When standard mode is selected, speed displays in miles per hour.
When metric mode is selected, speed displays in kilometers per hour.
Over Temperature This lamp illuminates to indicate an overheated engine. If the
indicator flashes, the overheating condition remains, and the system
will automatically reduce engine power.
EPS Warning This indicator illuminates briefly when the key is turned to the ON
position. If the light remains on, the EPS system is inoperative. See
your authorized POLARIS dealer for service.
Neutral This lamp illuminates when the transmission is in neutral and the
ignition key is in the ON position.
High Beam This lamp illuminates when the headlamp switch is set to high beam.
Helmet/Seat Belt This lamp flashes for several seconds when the key is turned to the
ON position. The lamp is a reminder to the operator to ensure all
riders are wearing helmets and seat belts before operating.
Check Engine This indicator appears if an EFI-related fault occurs. Do not operate
the vehicle if this warning appears. Serious engine damage could
result. See your dealer.
Rider
Information
Center
Speedometer
Indicator
Lamps
MODE
Button