Polaris 2015 Polaris M1400 - Manual (Page 32)

30
OPERATION
Failure to operate the vehicle properly can result in a collision, loss of control, accident or rollover,
which may result in serious injury or death. Read and understand all safety warnings outlined in the
safety section of this owner’s manual.
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 21, 68
Brake fluid Ensure proper level 68
Park gear Ensure vehicle does not roll when in PARK. Ensure
PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 54
Rear suspension Inspect, lubricate if necessary 54
Steering Ensure free operation 69
Tires Inspect condition and pressure 10, 70
Wheels/fasteners Inspect, ensure fastener tightness 70
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 55
Coolant level Ensure proper level 61
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 21
Air filter, pre-filter Inspect, clean 66
Headlamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
72
Brake light/tail lamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
73
Seat Belts Check length of belt for damage, check latches for
proper operation
23
Latches (hood/tailgate/seat) Ensure all latches are secure -
WARNING