Step 4-connecting the power cable – Elo TouchSystems 1767L User Manual
Page 19
Advertising
2-15
STEP 4-Connecting the Power Cable
Depending on where you live, you will use either the European or US/Canadian power cable.
•
Connect the female end of the power cable to the Brick power supply.
•
Connect the Brick power cable into the power port on the touchmonitor.
•
Route the cable through the cable management channel.
NOTE:
To protect your equipment against risk of damage from electrical surges in the power line,
plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector
to a grounded AC electrical outlet.
POWER CABLE
POWER
CONNECTIONS ON UNDERSIDE
Advertising