HEIDENHAIN ND 281 B v.2 - Manual (Page 58)

58
Compensation-value table for ND 281 B (linear measurement): factory default setting
Compensation-value table Description:
* Start character ( * );
ND-281 B MM Model of display unit; unit of measure (MM or IN);
SCALING = 14 Spacing = 14 ( range: 6 – 20)
DATUM = + 0.0000 Datum point 0 mm (value input)
CMP. NR. 00 = + 0.0000 Compensation value 0 = 0.000 mm (compensation value 0 is always 0)
CMP. NR. 01 = ---------- Compensation value 1 = no value entered
CMP. NR. 02 = ---------- Compensation values 2 – 63: no values entered (axis is not corrected)
CMP. NR. 03 = ---------- Compensation-value table is empty
CMP. NR. 04 = ----------
CMP. NR. 05 = ----------
CMP. NR. 06 = ----------
CMP. NR. 07 = ----------
.
.
.
.
.
.
.
.
.
.
.
.
CMP. NR. 60
= ----------
CMP. NR. 61 = ----------
CMP. NR. 62 = ----------
CMP. NR. 63 = ----------
* Final character (*);
Output Format of the Compensation-Value Table