HEIDENHAIN ND 1400 Addendum - Manual (Page 14)

14 1 Setup
1.
1
S
e
tu
p
Rotate Used to rotate the reference frame.
The rotation dialog is shown below:
Send Two Sends the X and Y values for the selected features.
When no features are selected, the X value and the Y value of the DRO (if the display is in
Cartesian coordinates), or the R value and the Theta value of the DRO (if the display is in Polar
coordinates) are sent.
Zero Two When a feature is selected the DRO will be zeroed based on the feature’s X and Y position. This
will only work for the currently selected feature, not for multiple selected features.
When no feature is present the DRO will be zeroed at the current location.
DMS/DD Toggles the current angle display format between decimal-degrees and degrees-minutes-
seconds.
Report
Header Brings up the report header dialog box (shown below) for entering header information.
Icon Name Description