Epson 2000 - Manual (Page 130)

9-10 Copying
R4C428_V2
long.bk
Rev_C
A5 size COPY.FM
1/14/00 Pass 2
L Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
Checking by using the lights on the control panel
Make sure the Stylus Scan is off. While holding down the
y stop/
clear button, press P the power button. Then release both buttons
and check the lights on the control panel.
If the j and g are on, A4 is the current paper size setting for
copying.
If the j and h lights are on, Letter is the current paper size setting
for copying.
Changing the paper size for copying
After determining which paper size setting is currently selected,
press the
y stop/clear button to switch between the two settings.
Copying using the control panel
Once you have made all of the appropriate settings, press the x
copy button to begin copying.
The document is drawn into the document feeder, then reverses
direction and passes back out the document feeder slot. At the
same time, the EPSON Stylus Scan feeds a blank sheet of paper
from the paper feeder, prints the image onto the paper, and ejects
the paper onto the output tray.
Note:
When copying a thin document that has images printed on both sides,
unwanted parts of the image on the opposite side of the paper may appear
in the copy. To avoid this, try selecting the
g color or h grayscale copy
mode.