Epson 2000 - Manual (Page 155)

Maintenance 11-9
R4C428_V2
long.bk
Rev_C
A5 size MAINT.FM
1/14/00 Pass 2
R Proof Sign-off:
tantoname
_______
leadername _______
editorname _______
Note:
To maintain print quality, EPSON recommends turning on the Stylus
Scan for at least one minute every month.
Using the control panel buttons
Follow the steps below to clean the print head using the control
panel buttons.
1. Make sure that the
P power light is on and that both the B
black and A color ink out lights are off.
2. Hold down the
R
cleaning button for three seconds, then
release it.
The EPSON Stylus Scan starts cleaning the print head and the
P power light begins flashing. Print head cleaning takes
about one minute to complete.
c
Caution:
Never turn off the Stylus Scan while the
P power light is
flashing. Doing so may damage the mechanism.