eMachines D720 - Manual (Page 34)

24 Chapter 2
Advanced
The Advanced screen allows the user to configure the various advanced BIOS options.
IMPORTANT:Making incorrect settings to items on these pages may cause the system to malfunction. Unless
you have experience adjusting these items, we recommend that you leave these settings at the
default values. If making settings to items on these pages causes your system to malfunction or
prevents the system from booting, open BIOS and choose Load Optimal Defaults in the Exit menu to
boot up normally.
The table below describes the items, menus, and submenus in this screen. Settings in boldface are the default
and suggested parameter settings.
Parameter Description Submenu Items
Boot
Configuration Enter the Boot Configuration menu. • Numlock
• Zip Emulation Type
Peripheral
Configuration Enter the Peripheral Configuration menu. • Serial Port A
• Infrared Port
• Azalia
• LAN
IDE
Configuration Enter the IDE Configuration menu. • IDE Controller
• HDC Configure as
• ACHI Option ROM Support
• SATA Port 0, 1, 4, and 5 Hotplug
• Channel 1 to 4 Master and Slave
Video
Configuration Enter the Video Configuration menu. • IGD Device2, Function1
• IGD Pre-allocate Memory
• IGD DVMT Size
• Clock Chip Intialize
• Enabled CK SSC
• IGD Boot Type
• IGD LCD Panel Type
• IGD TV
InsydeH20 Setup Utility Rev. 3.5
Information Main Advanced Security Power Boot Exit
Item Specific Help
XBoot Configuration
Configures Boot
XPeripheral Configuration
Settings.
XIDE Configuration
XVideo Configuration
XUSB Configuration
XChipset Configuration
XACPI Table/Features Control
Express Card [Disabled]
XPCI Express Root Port 1
XPCI Express Root Port 2
XPCI Express Root Port 3
XPCI Express Root Port 4
XPCI Express Root Port 5
XPCI Express Root Port 6
XASF Configuration
F1 Help
↑↓
Select Item F5/F6 Change Item F9 Setup Default
ESC Exit
←→
Select Menu Enter SelectXSubmenu F10 Save and Exit