HEIDENHAIN TNC 620 (340 56x-02) - Manual (Page 409)

HEIDENHAIN TNC 620 409
14.1 Gr
aphics (A
dv
anced Gr
aphic F
e
at
ur
es Sof
tw
a
re
Option)
3-D view
The workpiece is displayed in three dimensions.
You can rotate the 3-D display about the vertical and horizontal axes.
The shape of the workpiece blank can be depicted by a frame overlay
at the beginning of the graphic simulation.
The shape of the workpiece blank can be depicted by a frame overlay
at the beginning of the graphic simulation.
In the Test Run mode of operation you can isolate details for
magnification, see "Magnifying details", page 410.
U Press the soft key for 3-D view.
Rotating and magnifying/reducing the 3-D view
U Shift the soft-key row until the soft key for the rotating
and magnification/reduction appears
U Select functions for rotating and magnifying/reducing:
Function Soft keys
Rotate in 15° steps about the vertical axis
Rotate in 15° steps about the horizontal axis