HEIDENHAIN TNC 620 (81760x-02) Cycle programming - Manual (Page 443)

MEASURE KINEMATICS (Cycle 451, DIN/ISO: G451, option) 17.4
17
TNC 620 | User's Manual Cycle Programming | 2/2015
443
Parameter
number Meaning
Q141 Standard deviation measured in the A axis
(–1 if axis was not measured)
Q142 Standard deviation measured in the B axis
(–1 if axis was not measured)
Q143 Standard deviation measured in the C axis
(–1 if axis was not measured)
Q144 Optimized standard deviation in the A axis
(–1 if axis was not optimized)
Q145 Optimized standard deviation in the B axis
(–1 if axis was not optimized)
Q146 Optimized standard deviation in the C axis
(–1 if axis was not optimized)
Q147 Offset error in X direction, for manual
transfer to the corresponding machine
parameter
Q148 Offset error in Y direction, for manual
transfer to the corresponding machine
parameter
Q149 Offset error in Z direction, for manual
transfer to the corresponding machine
parameter