HEIDENHAIN Length Gauges - Manual (Page 33)

33
Switch boxes, coupling
Switch boxes for CT 2501, CT 6001,
MT 60 M, MT 101 M
Switch boxes are required for length
gauges with motorized plunger actuation.
The plunger is controlled through two push
buttons or by external signal. The SG 25 M
and SG 60 M switch boxes can adjust the
gauging force in three stages.
SG 25 M
ID 317436-01
SG 60 M
ID 317436-02
SG 101 V
1)
For the MT 101 M in vertical operation
ID 361140-01
SG 101 H
1)
For the MT 101 M in horizontal operation
ID 361140-02
Connector (female) 3-pin
For external operation of the switch box
ID 340646-05
1)
Separate power supply required
Power adapter for SG 101 V/H
An adapter to be connected to the switch
box powers the MT 101 M.
Voltage range 100 V to 240 V AC
Exchangeable plug adapter
(U.S. and Euro connectors included in
delivery)
ID 648029-01
Coupling
For connecting the plunger of the length
gauge (specifically for the MT 60 K,
MT 101 K, CT 2502 and CT 6002) to a
moving machine element
ID 206310-01