ShoreLand'r SL40TBAL - Manual (Page 5)

Midwest Industries, Inc. Ida Grove, IA 51445 (800)859-3028 www.shorelandr.com M301237
Page 5
WINCH POST ASSEMBLY
(See Detail J). The height that the bow eye is placed in your
boat will determine the length winch post required. Once this
is determined, attach the winch base to the tongue with three
1/2” x 4-1/2” hex bolts and lock nuts.
Align the holes in the Profile 2000 mounting channel with the
holes in the top of the winch base. Attach the front of the
winch head mounting channel to the base by placing a 1/2” x
4-1/2” hex bolt through the hole closest to the front of the
winch base. Secure with a lock nut. Do not tighten.
Note that the winch head can now be rotated either up or
down. Identify the correct hole combination to use to position
the bow eye roller just above the bow eye of your boat. When
determined, secure in this position by placing the bushing as
shown in Detail J inside the winch base so it aligns with the
hole just identified for the proper adjustment. Insert another
1/2” x 4-1/2” hex bolt through the determined mounting hole
in the mounting channel and winch base making sure the
bolt passes through the bushing as well. Secure with a
1/2” lock nut. Tighten all bolts.
See Page 2 for Tongue and Safety Chain Assembly
Instructions.