ShoreLand'r SL40TBAL User Manual
Page 7
Advertising
Midwest Industries, Inc.
Ida Grove, IA 51445
(800)859-3028
www.shorelandr.com
M301237
Page 7
R SERIES
The R-series roller rack is installed by placing the roller arm
assembly mounting channel over the rear cross member and
securing in place with a 1/2” x 4-1/4” hex bolt and lock nut.
(See Detail M). Note that it should be left loose until the boat
is placed on the trailer. Once the proper positions is
determined, it may be tightened. Repeat on the other roller
arm assembly.
The short stabilizer bunk is installed to the adjustable bunk
bracket on the front cross member with a 3/8” x 1” hex bolt
and lock nut. (See Detail K).
Advertising