Winch post assembly – ShoreLand'r SLR83TAL User Manual
Page 5
Advertising
Mount the winch post assembly to the tongue at
a location that best fits your watercraft. Secure
the winch post base weldment (Ref#2) to the
tongue using two (2) 1/2” X 3-9/16” X 5” square
u-bolts (Ref#11) and four (4) 1/2” stainless steel
hex lock nuts with nylon inserts. Mount the winch
post angle tube weldment (Ref#3) on the tongue
tube at a height that would best fit your water-
craft using a 1/2” X 3-9/16” X 5” square u-bolt
over the flange as shown in the drawing. Place
the legs of the U-bolt into the clamp (Ref#21)
and secure with two (2) 1/2” stainless steel hex
lock nuts with nylon inserts.
Winch Post:
Midwest Industries, Inc.
Ida Grove, IA 51445
(800)859-3028
www.shorelandr.com
M303186
Page 5
Winch Post Assembly
Advertising