ShoreLand'r SLRB40TBBXLW V.2 - Manual (Page 7)

Midwest Industries, Inc. Ida Grove, IA 51445 800.859.3028 www.shorelandr.com
0003463
Page 7
WINCH POST ASSEMBLY
The height that the bow eye is placed
in your boat will determine the length
winch post required. Once this is de-
termined, attach the winch base to the
tongue with three 1/2” x 4-1/2” car-
riage bolts and lock nuts.
Align the holes in the Profile 2000
mounting channel with the holes in the
top of the winch base. Attach the front
of the winch head mounting channel
to the base by placing a 1/2” x 4-1/2”
hex bolt through the hole closest to the
front of the winch base. Secure with a
lock nut. Do not tighten.
Note that the winch head can now
be rotated either up or down. Identify
the correct hole combination to use to
position the bow eye roller just above
the bow eye of your boat. When deter-
mined, secure in this position by plac-
ing the bushing as shown in Diagram
C inside the winch base so it aligns
with the hole just identified for the
proper adjustment. Insert another 1/2”
x 4-1/2” hex bolt through the deter-
mined mounting hole in the mounting
channel and winch base making sure
the bolt passes through the bushing
as well.
Secure with a 1/2” lock nut. Tighten all
bolts.