ShoreLand'r SLXR34BXLW V.2 User Manual
Page 7
Midwest Industries, Inc.
Ida Grove, IA 51445
800.859.3028
www.shorelandr.com
0003448
Page 7
WINCH POST ASSEMBLY
The height that the bow eye is placed in your
boat will determine the length winch post re-
quired. Once this is determined, attach the
winch base to the tongue with three 1/2” x
4-1/2” carriage bolts and lock nuts.
Align the holes in the Profile 2000 mounting
channel with the holes in the top of the winch
base. Attach the front of the winch head
mounting channel to the base by placing a
1/2” x 4-1/2” hex bolt through the hole clos-
est to the front of the winch base. Secure
with a lock nut. Do not tighten.
Note that the winch head can now be rotated
either up or down. Identify the correct hole
combination to use to position the bow eye
roller just above the bow eye of your boat.
When determined, secure in this position by
placing the bushing as shown in Diagram C
inside the winch base so it aligns with the
hole just identified for the proper adjustment.
Insert another 1/2” x 4-1/2” hex bolt through
the determined mounting hole in the mount-
ing channel and winch base making sure the
bolt passes through the bushing as well. Se-
cure with a 1/2” lock nut. Tighten all bolts.