EverFocus EDR-1610A - Manual (Page 34)

EDR910_1610_ma_en_rev1 00 - 34 -
(5) EMAIL:
By selecting “ON”, an email is sent in case of motion alarm, containing the alarm
message, the camera’s alarm image and the DVR IP address as sender.
Define the email recipiant’s details in the NETWORK menu.
(6) BUZZER: Alarm buzzer activation
ENABLE: Alarm buzzer is activated.
DISABLE: Alarm buzzer is deactivated.
(7) NETWORK:
Network alarm function activation. Network alarm reception requires installation of the
optionally available PowerCon software. The network alarm transmits both the alarm
message and the DVR IP address as sender to up to 3 recipiants.
YES: Network alarm is activated.
NO: Network alarm is deactivated.
(8) MAIN MON: Alarm reaction on MAIN monitor in case of motion alarm.
NO CHANGE: The currently selected main monitor display
does not change.
FULL SCREEN: Monitor displays the alarm camera image in
full screen.
(9) CALL MON: Alarm reaction on CALL monitor in case of motion alarm.
NO CHANGE: The currently selected call monitor display
does not change.
FULL SCREEN: Monitor displays the alarm camera image in
full screen.
(10) SUMMARY:
The SUMMARY menu item gives a summary on the settings for control purpose. Use the
JOG to browse the individual settings. This menu does not allow any editing of settings.
ATTENTION: The DVR’s motion detection has been developed for recording control, not
for use as central alarm station, especially with connection to security services.
The manufacturer is not liable for loss or charges resulting from such application, e.g.
through false alarm triggering.