SMA 485 Data Module Type B - Manual (Page 10)

4 Product Description SMA Solar Technology AG
10 485BRD-10-IA-en-12 Installation Manual
4 Product Description
4.1 485 Data Module
The 485 data module enables you to setup cable-connected RS485 communication.
4.2 Type Label
The type label clearly identifies the 485 data module. The type label is located on the front of the
485 data module.
Figure 2: Layout of the type label (example)
You require the information on the type label for customer support from the SMA Service Line.
The type label must remain permanently attached to the 485 data module.
Item Designation
A Holes for attaching the data module using the plastic spacers
B Sockets to plug in the spring clamp terminals
C Hole for attaching the plastic foil
D Shield clamps
E Hole for attaching the data module using the metal spacer
F Type label
Item Explanation
A Number of the production order
B Version of the 485 data module
C Device type
D Serial number