SMA POWER MODUL - Manual (Page 14)

Electrical Connection SMA Solar Technology AG
14 PModul-IEN094510 Installation Guide
21. Screw the nuts tightly onto the cable gland until the cable can no longer be moved. If necessary,
screw the counter nut more tightly.
22. Flip down the display.
23. Screw the display screw tightly in place.
24. Close the inverter as described in its installation guide.
25. Connect the other end of the cable to the consumer, as described in the consumer manual.
26. Commission the inverter as described in its manual.
☑ The Power Modul is installed.