SMA String-Monitors Pole Mounting Set - Manual (Page 13)

1.4 Nomenclature
Complete designation Designation in this document
Pole mounting set for SMA String-Monitors • Product
SMA String-Monitor • SMA String-Monitor
• DC sub-distribution
2 Intended Use
Pole mounting is a mounting system used to attach the SMA String-Monitors to a round or square
pole.
Pole mounting must only be used for the following device types from SMA Solar Technology AG:
• SMA String-Monitor:
– SSM-U-1610 / SSM-U-1615
– SSM-U-2410 / SSM-U-2415
– SSM-U-3210 / SSM-U-3215
The dimensions of the pole must be suitable for the pole brackets (see Section 4 "Selecting the
Mounting Location", page 14).
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable standards and directives. Any other application may cause
personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and
warranty claims and usually void the operation permit. SMA Solar Technology AG shall not be
held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as
appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
3 Scope of Delivery
Check the scope of delivery for completeness and any externally visible damage. Contact your
distributor if the scope of delivery is incomplete or damaged.
Figure 3 : Components included in the scope of delivery
Position Quantity Designation
A 2 C profile rail with polyester bracket
2 Intended Use SMA Solar Technology AG
Installation Manual 13 SSMUMast-IA-xx-10
ENGLISH