SMA String-Monitors Pole Mounting Set - Manual (Page 15)

☐ Mount the SMA String-Monitor in a horizontal position.
☐ Do not mount the SMA String Monitor in a twisted manner.
☐ Do not mount the SMA Sunny String‑Monitor in a horizontal or inclined position.
☐ An external cable support rail must be provided.
Observe minimum clearances:
Figure 4 : Minimum clearances
Position Explanation
A 200 mm
B 650 mm
C 800 mm
D 150 mm
E 650 mm
5 Mounting the SMA String-Monitor on the Pole
Risk of injury when lifting the DC sub-distribution, or if it is dropped
There is risk of injury if the DC sub-distribution is lifted incorrectly or dropped while being
transported or when attaching it to or removing it from the wall mounting bracket. Weight of the
DC sub-distribution without installed accessories: 35 kg.
• Two persons are required for mounting and disassembling the DC sub-distribution.
• Carefully lift and transport the DC sub-distribution.
5 Mounting the SMA String-Monitor on the Pole SMA Solar Technology AG
Installation Manual 15 SSMUMast-IA-xx-10
ENGLISH