SMA BEAM-AW15 - Manual (Page 22)

Installation of the external Antenna Kit SMA Solar Technology AG
22 BEAMAW-BXX073022
1.1 Retrofitting for initial Situation (A)
This section refers solely to initial situation (A). For the different initial situations, please refer to
section “Installation of the external Antenna Kit" on page 20.
Fasten antenna extension cable
1. Unscrew the antenna tip from the inverter housing. It will
still be required later.
2. Remove the sealing from the thread of the antenna.
3. Screw the antenna extension cable to the
thread of the antenna on the inverter
housing.