SMA PVO-N-20 - Manual (Page 48)

11 Decommissioning SMA Solar Technology AG
48 PVO-BOX-IA-en-10 Installation Manual
11 Decommissioning
11.1 Disassembling the SMA PV Offset Box
1. Disconnect the SMA PV Offset Box from all voltage sources (see Section 9 "Disconnecting the
SMA PV Offset Box from Voltage Sources", page 43).
2. Remove all connection cables from the SMA PV Offset Box.
3. Loosen the fastening screws and remove the SMA PV Offset Box from the mounting surface.
4. Screw the enclosure lid onto the SMA PV Offset Box with the 4 screws.
11.2 Packing the SMA PV Offset Box
• Pack the SMA PV Offset Box. Use the original packaging or packaging suitable for the weight
and dimensions of the SMA PV Offset Box (see Section 12 "Technical Data", page 49).
11.3 Disposing of the SMA PV Offset Box
• Dispose of the SMA PV Offset Box at the end of its service life in accordance with the disposal
regulations for electronic waste currently applicable at the installation site.