SMA METER BOX FOR SUNNY BACKUP - Manual (Page 13)

SMA Solar Technology AG 5 Mounting
Installation Manual METERBOXSBU-IA-en-40 13
5.2 Mounting the Meter Box
5.2.1 Mounting the Meter Box on the Wall
Dimensions for wall mounting:
Figure 5: Position of the drill hole behind the Meter Box
1. Hold the retainer pressed forward and slide it up
out of the guide. By doing this, you remove the
retainer from the rear of the Meter Box.
2. Mark the position of the drill hole on the wall. Observe the position of the drill hole behind the
Meter Box.
3. Drill the hole (diameter: 6 mm).
4. Attach the retainer to the wall using the screw
anchor and the screw. Align the retainer so that
both pins of the retainer point upwards and the
SMA logo faces to the front.