SMA SB 1200 Installation - Manual (Page 46)

Opening and Closing SMA Solar Technology AG
46 SB12-17-IA-en-52 Installation Guide
4. Unlock all the DC plug connectors: Use a
screwdriver with a width of 3.5 mm.
– Insert a screwdriver into one of the side slits (1).
– Disconnect the DC plug connectors (2).
5. Pull out the AC plug.
DANGER!
Danger to life due to unsafe disconnection from the PV generator!
A secure separation from the PV generator is only guaranteed after pulling off the
Electronic Solar Switch and all DC plug connectors.
• Remove all DC plug connectors to
completely disconnect the PV generator
from the inverter.