SMA SB 1200 Installation - Manual (Page 61)

SMA Solar Technology AG Decommissioning
Installation Guide SB12-17-IA-en-52 61
10 Decommissioning
10.1 Dismantling the Inverter
1. Open the inverter as described in section 7.2 ”Opening the Inverter” (page 45).
2. Remove all cables from the inverter.
3. Close the inverter with the 4 screws.
4. Loosen the lower screw between the inverter und
wall mounting bracket.
5. Remove the inverter upward from the wall mounting
bracket.
☑ The inverter is dismantled.
CAUTION!
Risk of injury due to the heavy weight of the inverter.
• Remember that the inverter weighs approx. 25 kg.