SMA SB 2800i Installation - Manual (Page 20)

Installation Installation Guide
18 SMA Regelsysteme GmbH SB2800i-11:SE0504
9. For cables that require the PG16 gland: Tighten the bolt of
the PB16 gland.
10. The AC connector socket is now ready to use.
11. Seal the AC connector socket in case you do not insert it into
the Sunny Boy.
12. The AC connector socket can be inserted into the Sunny Boy
in case the Sunny Boy is already mounted in the correct posi-
tion. Remove the seal from the AC connector on the Sunny
Boy, insert the AC connector plug and tighten the seal.
Do not switch on the circuit breaker yet! The
Sunny Boy 2800i may only be connected to the
AC grid when the PV strings have been
connected and the device is tightly closed.