SMA SB 2500 Installation - Manual (Page 60)

Decommissioning SMA Solar Technology AG
60 SB25-30-IA-en-51 Installation Manual
10 Decommissioning
10.1 Unmounting the Inverter
1. Open the inverter as described in Section 7.2 "Opening the Inverter" (page 44).
2. Remove all cables from the inverter.
3. Close the inverter with the four screws.
4. Loosen the lower screw between the inverter and
the wall mounting bracket.
5. Lift the inverter off the wall mounting bracket.
☑ The inverter is unmounted.
CAUTION!
Risk of injury due to the heavy weight of the inverter
• Note that the inverter weighs approx. 32 kg.