SMA SC 500U Installation - Manual (Page 34)

SMA Solar Technology AG
34 SC500U-IUS093411 Installation Guide
5.4.8 Attaching the Kick Plates to the Sunny Central
1. Attach the kick plates to front and back of the Sunny
Central.
2. Tighten the screws on the kick plates with a torx
screwdriver.
5.4.9 Remove Transport Locks
The transformer and choke in the magnetics cabinet are
secured for transport with transport locks (A) on the
cabinet. A transport lock is located on both the right and
left side of the bottom transformer block and two
transport locks are located on the front of the top choke
block. Each transport lock is attached using a total of four
screws.
Right figure: position of the transport locks (A)
1. Loosen the screws of the transport locks.
2. Remove the screws and the transport locks.
3. Close the doors of the Sunny Central.
Stop S tart
A
A
Stop S tart