SMA VOLTAGE STABILIZER - Manual (Page 22)

5 Electrical Connection SMA Solar Technology AG
22 Ukonstanter-IEN103610 Installation Guide
Connecting the 230 V Circuit
1. Strip the cable insulation.
2. Insert a screwdriver into the square-shaped opening next the terminal and open the terminal lock
by pressing it.
3. Connect the cables to the terminals. Use wire
sleeves for this.
4. Pull the screwdriver out of the terminal.
5. Tighten the cable screw connections.
Connecting the 415 V Circuit
1. Strip the cable insulation.
2. Insert a screwdriver into the square-shaped opening next the terminal and open the terminal lock
by pressing it.
3. Connect the cables to the terminals. Use wire
sleeves for this.
4. Pull the screwdriver out of the terminal.
5. Tighten the cable screw connections.
SMA
SMA