SMA SMC 4600A Installation - Manual (Page 30)

Electrical Connection SMA Solar Technology AG
30 SMC46-60A11-IA-en-81 Installation Manual
5.4.3 Opening the DC Connector
1. Unscrew the screw connection.
2. Unlock the DC connector: Insert a screwdriver into
the snap slot on the side and lever it out
(blade width: 3.5 mm).
3. Carefully pull the DC connector apart.
4. Release the clamping bracket. To do so, insert a
screwdriver into the clamping bracket to lever it
open (blade width: 3.5 mm).
5. Remove the cable.
☑ The cable is now detached from the DC connector.