2 assembling the dc connectors, Assembling the dc connectors – SMA STP 15000TL Installation User Manual
Page 36
Advertising

Electrical Connection
SMA Solar Technology AG
36
STP20TLHE-IA-IEN122222
Installation Manual
6.4.2 Assembling the DC Connectors
For connection to the inverter, all connection cables of the PV modules must be equipped with the DC
connectors provided.
To assemble the DC connectors, proceed as follows. Ensure the connectors have the correct polarity.
The DC connectors have the symbols "+" and "‒".
Cable requirements
• Use a PV1-F cable.
Procedure
1. Lead the stripped cable all the way into the plug.
2. Press the clamping bracket down.
☑ The clamping bracket snaps audibly into place.
Advertising
This manual is related to the following products: