SMA STP 15000TL Installation - Manual (Page 37)

SMA Solar Technology AG Electrical Connection
Installation Manual STP20TLHE-IA-IEN122222 37
3. Ensure that the cable is correctly positioned:
4. Push the swivel nut up to the thread and tighten (torque: 2.0 Nm).
Result Measure
☑ If the stranded wire is visible in the chamber
of the clamping bracket, the cable is
correctly positioned.
• Proceed to Step 4.
☑ If the stranded wire is not visible in the
chamber, the cable is not correctly
positioned.
• Loosening the clamping bracket: insert a
screwdriver (blade width: 3.5 mm) into the
clamping bracket and lever it out.
• Remove the cable and go back to step 1.
+