8 troubleshooting, Troubleshooting – SMA WBP-Box User Manual
Page 20
Advertising
8 Troubleshooting
SMA Solar Technology AG
20
WBP-Box-IEN103320
Installation Guide
8 Troubleshooting
Symptom
Cause
Corrective measures
All LEDs are off.
The small wind turbine system
is stopped; there is no
voltage.
• Commission the small wind turbine
system. Observe all manufacturer
specifications when doing so.
All LEDs are off.
There is no voltage.
• Check the connection of the small
wind turbine system. See
section 5.3 ”Connecting the Small
Wind Turbine System”, page 15
for this.
• If the Windy Boy Protection Box is
permanently in this state, contact
the SMA Serviceline.
Advertising