Enterasys Networks ROAMABOUT RBT-1602 - Manual (Page 87)

RoamAbout Pigtail Connection
RoamAbout Antenna Site Preparation and Installation Guide A-17
RoamAbout Pigtail Connection
Part Number: RBT4K‐AG‐PT20F or RBT4K‐AG‐PT20M. One end is a Reverse SMA connector, and
the other end is Reverse‐N female or male, respectively.
The end with the Reverse SMA connector connects to the RBT‐1602 and the RBT‐4102. The
Reverse‐N connector at the opposite end of the cable matches the polarity of the Reverse‐N
connectors of the other components that are part of your outdoor antenna cabling system.
Table A-15 Pigtail Connection Specification
Specification Value
Mechanical
• Length 20 in. (50.8 cm)
• Weight 0.0092 lb/ft (0.014 kg/m)
• Bend Radius 0.25 in. (6.4 mm)
• Tensile Strength 15 lb (6.8 kg)
Environmental
• Temperature Range:
- Operating
- Storage -40 to +85 °C (-40 to +185 °F)
-70 to +85 °C (-94 to +185 °F)
Electrical
• Cutoff Frequency 90 GHz
• Velocity of Propagation 66%
• Shielding Effectiveness Greater than 90 dBi
• DC Resistance
- Inner Conductor
- Outer Conductor 81.0 ohms/1000ft (266 ohms/km)
9.5 ohms/1000ft (31.2 ohms/km)
• Peak Power 0.6 kW
Connector Type Reverse SMA Connector
Reverse-N, Female or Male
Cable Loss 2.4 GHz: 0.65 dB
5.3 GHz: 1.0 dB
5.8 GHz: 1.1 dB