iHealth Wireless Blood Pressure Monitor User Manual

Page 4

Advertising
background image

4

Connect to iOS Device via Bluetooth

• Apply the cuff or press the START/STOP button, the Bluetooth indicator

will begin flashing.

• Turn Bluetooth "On" under the "Settings" menu on the iOS device.
• Wait until the model name printed on the monitor, (i.e. "BP5 xxxxxx") and

"Not Paired" appear in the Bluetooth menu, and select the model name "BP5

xxxxxx" to pair and connect. The Bluetooth indicator will remain steady
upon successful connection. When using the monitor for the first time,
it may take up to 30 seconds for your iOS device to detect the Bluetooth
signal.

• Each subsequent time you use the monitor, "Not Connected" will be displayed

next to "BP5 xxxxxx" in the Bluetooth Menu.

• Please repeat these steps when you switch to another iOS device with the

monitor.

Monitor Status

Bluetooth Indicator

Waiting to connect

Flashing blue light

Connected and measuring

Steady blue light

Measurement completed and ready to
disconnect

Gradually extinguishing light

MEASUREMENT PROCEDURES
Blood pressure can be affected by the position of the cuff and your
physiologic condition. It is very important that the cuff should be
placed at the same level as your heart.

Body Posture

Sitting Comfortably During Measurement
a. Be seated with your feet flat on the floor without crossing your

legs.

b. Place your hand, palm-side up, in front of you on a flat surface

such as a desk or a table.

c. The middle of the cuff should be at the level of the right atrium

of your heart.

Advertising
This manual is related to the following products: