Irritrol Junior MAX - Manual (Page 6)

PROGRAMMING:
It is recommended to press the RESET button to clear the memory.
Press NEXT to advance to SET TIME/DAY
Program Position: SET TIME/DAY
Set the current YEAR, MONTH, DAY & TIME.
Set the YEAR with +/ON or -/OFF
Press
Set the MONTH with +/ON or -/OFF
Press
Set the DAY with +/ON or -/OFF
Press
Set the TIME with +/ON or -/OFF
Press if you wish to go back to YEAR setting.
NOTE: If you press and hold either +/ON or -/OFF continuously, the digits
will advance quickly.
Press NEXT to advance to RUN TIME
Program Position: RUN TIME
This controller has 3 independent programs: A, B & C. Select the stations you wish to
have for each program. Program A is the first program.
You can assign stations to a program by entering RUN TIME for these stations.
Unselected stations in a program will remain OFF.
Press PROG to select the program to be set.
Press +/ON or -/OFF to set the desired RUN TIME.
Press to advance to next station.
To RESET Run Time back to "OFF": Press BOTH +/ON and -/OFF for a few seconds
until OFF is displayed.
To disable the MASTER VALVE from working in this program:
Press until "M" starts flashing. The display show "On".
Press -/OFF to disable the MASTER VALVE. Press +/ON to resume its operation.
Press NEXT to advance to WATER DAYS
6