iSys iTerra Elite Color LED Printer - Manual (Page 75)

_________________________________________________________________________________________________________________________
PAGE 75 --- iTerra Elite Quick Start Guide
© 2008 iSys-The Imaging Systems Group Inc.
Connectivity Type
1) Parallel Connect Instructions
• Open a DOS command Prompt window and CD (change directory) to the appropriate host directory
where the overlay file is loaded.
• Type the following to send overlay .prn to printer ‘copy/b filename lpt1:’ and hit return or enter.
2) Network Connect Instructions
• Open a DOS Command Prompt window and CD (change directory) to the appropriate host directory
where the overlay file is loaded.
• Use lpr command to send overlay .prn file to the printer, as follows from command prompt window.
“lpr-S ip_address-P lp1:filename”
3) USB Connect Instructions
• to print via USB connection, you will need to install ‘Free Raw Print’ utility. This is a freeware utility
available on the World Wide Web.
• Use Free Raw Print application to print overlay .prn file. Ensure that printer highlighted is the iTerra
Elite and browse for the demo plot file, select and hit print within FRP utility.
NOTE: • The printer windows driver should be installed first and configured.
• The printer should be powered on and connection type configured.
• Use this method if you do not have the Storage Manager Utility.