Specifications – JBL Synthesis Studio 530 User Manual
Page 12
12
sPeCiFiCatiOns
Studio 590 FLooRStANdiNG SpEAkER
Speaker type:
2-1/2-way dual-woofer, floorstanding
Low-frequency transducer:
Two 8" (200mm) PolyPlas™ cones with Symmetrical Field Geometry™
magnet structures, cast frames and rubber surrounds, magnetically
shielded
High-frequency transducer:
1" (25mm) compression driver with neodymium magnet and one-piece
Teonex
®
diaphragm on a glass-filled ABS Bi-Radial
®
horn, magnetically
shielded
Recommended amplifier power:
250 watts
Frequency response:
35Hz – 40kHz (–6dB)
Nominal impedance:
6 ohms
Sensitivity (2.83V/1m):
92dB
Crossover frequencies:
1.5kHz
Enclosure type:
Ported
Connector type:
Dual gold-plated binding posts (bi-wire capable)
Available finishes:
Black or cherry
Dimensions (H x W x D):
49-3/4" x 12-11/16" x 16-1/4"
(1263mm x 322mm x 413mm)
Weight:
69.5 lb (31.5kg)
Studio 580 FLooRStANdiNG SpEAkER
Speaker type:
2-way dual-woofer, floorstanding
Low-frequency transducer:
Two 6-1/2" (165mm) PolyPlas cones with Symmetrical Field Geometry™
magnet structures, cast frames and rubber surrounds, magnetically
shielded
High-frequency transducer:
1" (25mm) compression driver with neodymium magnet and one-piece
Teonex
®
diaphragm on a glass-filled ABS Bi-Radial
®
horn, magnetically
shielded
Recommended amplifier power:
200 watts
Frequency response:
40Hz – 40kHz (–6dB)
Nominal impedance:
6 ohms
Sensitivity (2.83V/1m):
90dB
Crossover frequencies:
1.5kHz
Enclosure type:
Ported
Connector type:
Dual gold-plated binding posts (bi-wire capable)
Available finishes:
Black or cherry
Dimensions (H x W x D):
42-1/16" x 9-7/8" x 13-3/4"
(1069mm x 250mm x 348mm)
Weight:
49 lb (22.2kg)