JBL Synthesis S3900 - Manual (Page 6)

6
To bi-wire the S3900, first remove the connector jumper bars as shown in the illustration.
A. Unscrew
all four caps
B. Remove
jumpers
If you’re bi-wiring with a single stereo power amplifier, connect the speakers according to the following illustration.
HF/UHF
Connection
Amplifier
Right
Ch.
Left
Ch.
HF/UHF
Connection
LF Connection LF Connection
Right
Speaker
Left
Speaker
If you’re bi-amping or bi-wiring with two stereo power amplifiers, connect the speakers according to the following
illustration.
HF/UHF
Connection
Amplifier 1
Amplifier 2
Right
Ch.
Right
Ch.
Left
Ch.
Left
Ch.
HF/UHF
Connection
LF
Connection
LF
Connection
Right
Speaker
Left
Speaker
In either case, follow the instructions for the different connector types in Basic Single-Wire Connection, on page 4.
NOTE: For more information about various speaker-wire and connection options, contact your local JBL dealer.