Laney LR20 User Manual
Page 16
CHANNEL 1 & 2 SETTINGS: The control levels set on CH1 and CH2 are not lost when
switching between Channels.
For example, CH1 may be set up as a clean sound with Chorus & Reverb applied & both EQ settings
at 5. If you now switch to CH2, change to an overdrive sound and alter the EQ & FX controls, when
you switch back to CH1, even though the EQ & FX controls are set to CH 2 positions you will hear
CH1 settings. So two independent channels with totally different sounds and volumes can be
switched between seamlessly with either the channel buttons or footswitch. Settings for both
channels are recalled even after switch off.
VOLUME CONTROLS FOR EACH CHANNEL: Each channel has it own individual control to
adjust the preamplifier output. These controls are always WYSIWYG, (What You See Is What You
Get), so that you immediately know what volume level to expect.
EQUALISATION CONTOUR/PRESENCE: As the name suggests this set of controls can have
a great effect on your sound. Basically the Contour control is a mix
of conventional Bass & Mid controls, and the Presence acts more as
a Bright/Tone Control.
MOD FX: Activate by pressing the ON Button. This control
applies various effects to make your own unique sound. Choose
from Chorus, Flanger, Phaser or Tremolo depending on the style
required or the Amp Model chosen, the LED will flash according to
the modulation of effect used. These settings can be applied
individually to CH1 and CH2.
2 14
6 12
8
7
9
15 16