Laney LX120RT User Manual
Page 10
PANEL CONTROLS
This socket should be used for connecting your instrument to the amplifier. Only use a good quality screened cable.
Controls the volume level of the clean channel.
Controls the amount of bass or bottom end on the clean channel.
Controls the amount of mid on the clean channel.
Controls the amount of treble on the clean channel.
Switch in to activate the overdrive ‘Crunch’ channel. When active, control the amount of distortion with (8) and the overall volume
with (9)
Indicates that the drive channel is active.
Controls the crunch channel gain, low down for classic rock and blues, higher up for hard rock and metal.... the higher you go the
more Extreme it gets. Use in conjunction with (9) to get the overall level balanced how you want it.
Controls the overall level on the drive channel. Use with (8)
eXtreme Tone Shaping. This applies a scooped mid tone shape to the drive channel and boosts certain key frequencies for a unique
sound.
Controls the amount of bass or bottom end on the drive channel.
Controls the amount of mid on the drive channel.
Controls the amount of treble on the drive channel.
10
11